12.99 329.97 bud industries inc. any reproduction in part or whole without a d c b a a b c d cad generated drawing, do not manually update scale size cad file: dwg. no. d sheet rev. date approvals drawn checked approved bud industries inc. 1 1 of unless otherwise specified 2 SNB-3732 nema sheet metal box qty. issue used on all dimensions are in .010 material finish as noted as noted do not scale drawing parts list 1 2 3 4 5 6 7 8 8 7 6 5 4 3 [millimeters] inches .xxx the written permission of bud industries inc. is prohibited. revisions dwg. no. e f e f SNB-3732 dab 9-21-07 tolerances: decimals: .xx .03 the information contained in this drawing is the sole property of per ecn #10446 1-13-09 bt quarter-turn keyed latch .437 [11.10] x .687 [17.45] oblong each bracket wall mounting bracket kit to contain the following: (4) brackets, (4) bolts, (4) sealing washers, (4) flat washers, (4) lockwashers & (4) hex nuts a 300.00 11.81 213.16 8.39 9.84 249.99 wall mounting brackets, hinge pins, striker - natural front view (less cover) material: body & cover - 16 ga. [1.5mm] c.r.s. internal panel - 14 ga. [2.0mm] c.r.s. wall mounting brackets - 14 ga. [2.0mm] stainless steel hinge pins, striker & hardware - stainless steel gasket - .25 [6.35] thick neoprene (black) or equivalent sealing washers - black neoprene or equivalent finish: body & cover - light gray smooth powder coat internal panel - zinc chromate internal panel detail m8 x 16mm lg. weld stud/standoff (4x) (flat washer, lockwasher & hex nut for internal panel mounting) 259.56 opening 209.55 225.02 8.86 8.25 opening 10.22 6.89 175.01 scale 2 : 1.75 gasket detail b no gap between gasket joint. optionally joint may be sealed with adhesive. .75 typ. 19.05 a 7.90 200.66 10.43 265.00 185.12 7.29 9.53 .38 ref. 199.77 7.87 .45 11.43 .69 17.53 detail a scale 2 : 1.75 .125 [3.18] x .125 [3.18] chamfer (8x) .250 6.35 (8x) 8.74 (8x) .344 .472 11.99 .492 12.50 .984 24.99 1.76 44.70 1.476 37.49 .984 24.99 .644 16.36 1.125 28.58 19.99 .787 .41 10.41 .394 (4x) 10.01 do not powder coat) (for grounding - m6 x 16mm lg. weld stud see detail "b" (1x) cover & (1x) body weld & grind smooth all corners & seams
|
